HP Latex 2700 User Guide 2
HP Latex 2700 Manual
 |
View all HP Latex 2700 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Latex 2700 manual content summary:
- HP Latex 2700 | User Guide 2 - Page 1
HP Latex 2700 Series Jumbo Dual Roll Kit Series User Guide SUMMARY How to use your product. - HP Latex 2700 | User Guide 2 - Page 2
to change without notice. The only warranties for HP products and services are set forth in the express warranty statement accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors - HP Latex 2700 | User Guide 2 - Page 3
1 Introduction ...1 2 Dual-roll split-spindles center support...2 Assemble the center supports...2 3 Load rolls onto the split spindles ...3 Roll-loading procedure...3 4 Load a roll (roll-to-roll configuration) ...5 Load a roll...6 Manual loading ...7 5 Dual-roll spindle specifications...10 iii - HP Latex 2700 | User Guide 2 - Page 4
1 Introduction This guide describes the installation and use of the HP Latex 2700 Series Jumbo Dual Roll Kit Series. With this accessory installed in the HP Latex 2700, the printer can print dual-roll applications with large rolls of substrate: ● Maximum roll width: 2 × 1.52 m (2 × 60 in) ● Maximum - HP Latex 2700 | User Guide 2 - Page 5
can print on two rolls at the same time by using the dual-roll split spindle. See the installation guide to check the installation of the center-support split spindle assembly. IMPORTANT: Two dual-roll center supports are provided. The one with a "I" label is for the input side of the printer and - HP Latex 2700 | User Guide 2 - Page 6
rolls. Roll-loading procedure The following steps provide the complete procedure for this topic. NOTE: This video applies to HP Latex 3500/3600 series, as well as the HP Latex 2700 series printers. 1. Insert the first roll on one of the split spindles. 2. Insert the second roll on the other split - HP Latex 2700 | User Guide 2 - Page 7
TIP: Before inflating, use the pneumatic gun to blow air around the valve area to remove any dirt. WARNING! The air gun provided with the printer is only intended to inflate the spindle. When recommended to use for cleaning purposes, make sure to do so according to local regulations since additional - HP Latex 2700 | User Guide 2 - Page 8
the roll-to-roll configuration for the best performance. You can load substrate with the printed face inwards or outwards on the spindle, in which case the spindle will turn in the opposite direction. The printer asks you for the winding direction if it cannot detect it automatically. Load a roll - HP Latex 2700 | User Guide 2 - Page 9
the front of the printer; on the left as seen from the rear. That way, when the shorter rolls runs out, you can continue printing on the other roll loaded. 3. If they are installed, remove the substrate edge holders from the print platen so that they do not get in the way while loading the substrate - HP Latex 2700 | User Guide 2 - Page 10
core into the front of the printer. In this case, the geared end of the spindle should be on the right. Manual loading The following steps provide first input roll and place it in the print zone. 6. Push the substrate from the first roll through the printer until it reaches the output spindle. 7. - HP Latex 2700 | User Guide 2 - Page 11
a minute). NOTE: Some substrates (such as transparent substrates) cannot be measured by the printer in this way. In such cases, you will be asked to enter the Left Edge and Width fields yourself into the Internal Print Server. Use the ruler on the spindle to check these values. 8 Chapter 4 Load - HP Latex 2700 | User Guide 2 - Page 12
The printer is now ready to print. Manual loading 9 - HP Latex 2700 | User Guide 2 - Page 13
5 Dual-roll spindle specifications This topic provides a full set of reference information for this subject. Dual-roll spindle specifications Characteristic Specification Minimum roll width 635 mm (25 in) Maximum roll width 2 × 1.52 m (2 × 60 in) Minimum gap between rolls 134 mm (5.3 in)
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
 |
 |
HP Latex 2700 Series Jumbo Dual Roll Kit
Series
User Guide
SUMMARY
How to use your product.