HP Latex 2700 User Guide 2 - Page 8
Load a roll (roll-to-roll configuration)
 |
View all HP Latex 2700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
4 Load a roll (roll-to-roll configuration) The two substrate rolls are mounted on the rear dual-roll spindle and will be collected on the front dual-roll spindle. The substrate goes from the input spindle over the main roller, over the platen, over the front diverters and then to the output spindle. NOTE: When using dual rolls, you are recommended to use the roll-to-roll configuration for the best performance. You can load substrate with the printed face inwards or outwards on the spindle, in which case the spindle will turn in the opposite direction. The printer asks you for the winding direction if it cannot detect it automatically. Load a roll (roll-to-roll configuration) 5
-
1 -
2
-
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13
 |
 |
Load a roll (roll-to-roll configuration)
4
The two substrate rolls are mounted on the rear dual-roll spindle and will be collected on the front dual-roll
spindle. The substrate goes from the input spindle over the main roller, over the platen, over the front diverters
and then to the output spindle.
NOTE:
When using dual rolls, you are recommended to use the roll-to-roll configuration for the best
performance.
You can load substrate with the printed face inwards or outwards on the spindle, in which case the spindle will
turn in the opposite direction. The printer asks you for the winding direction if it cannot detect it automatically.
Load a roll (roll-to-roll configuration)
5