HP Latex 310 Users Guide - Page 101
Temperature profile, Select the number of passes, Adjustments, Reset, Adjust substrate advance
View all HP Latex 310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
You can use the front panel to adjust the following settings while printing. ● To change temperature, vacuum, inter-pass delay offset, and substrate-advance settings while printing, press Adjustments in the front panel's print job screen, and choose the setting that you want to adjust. The changes that you make take effect immediately, but they are not saved: the next job will use the settings in the substrate preset as usual. You can use the Save button to save settings, and the Reset button to restore the last saved settings. NOTE: The Save button is not available for a generic or non-editable preset. ● To change substrate advance calibration while printing (in case of banding): press Adjustments > Adjust substrate advance. The changes that you make take effect immediately, but they are not saved for the next job. See also Substrate advance adjustment while printing on page 111. To make permanent substrate-advance changes, use the RIP or front panel to modify the substrate preset. Temperature profile Many of the main and advanced substrate settings are related to temperature control, since this is a critical area for correct printing results with latex inks on a wide variety of substrates. NOTE: There is a delay between making a change and seeing the results. See the front panel for actual temperature checking. NOTE: If you selected English units of measurement, you may notice some discrepancies, as the printer works in Celsius and makes the conversion. Select the number of passes Increasing the number of passes will tend to improve the print quality but reduce the speed of printing. NOTE: The following table is for the normal ink limit unless otherwise indicated. Category Banner Self-adhesive vinyl Paper Substrate name Generic PVC Banner Generic Backlit PVC Banner Generic Self-Adhesive Vinyl Generic Backlit Self-Adhesive Vinyl Generic Paper Generic Coated Paper Available print modes 4p_4C_80 6p_6C_100 10p_6C_110 12p_6C_200 16p_6C_200 20p_6C_200 6p_4C_80 8p_6C_100 10p_6C_110 12p_6C_130 16p_6C_150 20p_6C_200 6p_4C_80 8p_6C_100 10p_6C_110 8p_6C_90 10p_6C_100 ENWW Add a new substrate 95