HP Latex 310 Users Guide - Page 83
View information about the substrate
View all HP Latex 310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
9. The printer searches for the reference line on the substrate. If it fails to find it, the front panel asks you to move the substrate using the Rewind substrate and Advance substrate keys until the reference line is aligned with the permanent line on the platen. You may find it useful to mark where the reference line is on the other side of the substrate. View information about the substrate On the front panel's home screen, press . The following information appears on the front panel, if any substrate is loaded: ● The substrate type ● The substrate name ● The substrate width in millimeters (estimated by the printer) ● The remaining length of the substrate, if known ● The printing zone (platen or ink collector) ● The take-up reel status ● Whether double-sided printing is selected ● The color calibration status If no substrate is loaded, the message Out of substrate appears. The same information appears on the Embedded Web Server's Supplies page. ENWW View information about the substrate 77