HP Latex 310 Users Guide - Page 56
Load a roll into the printer
View all HP Latex 310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Load a roll into the printer To start this procedure, you need to have a roll loaded on the spindle. See Load a roll onto the spindle on page 46. The normal minimum substrate width is 23 inches (584 mm). To load substrates down to a minimum width of 10 inches (254 mm), go to the front panel and press , then Substrate > Substrate handling options > Enable narrow substrate. With this option, print quality is not guaranteed. TIP: To load a roll of textile substrate, see The loading accessory (360 and 370 only) on page 58; and remember to use the ink collector if the substrate is porous (which textiles usually are). TIP: When loading very thin or very thick substrates, or substrates with a tendency to curl, you should follow the manual loading procedure to reduce the risk of substrate jams and printhead crashes; see Assisted manual load on page 61. 1. At the printer's front panel, press , then Load. Alternatively, press , then Substrate load > Load roll. 2. The load configuration screen appears. 50 Chapter 3 Handle the substrate and troubleshoot substrate issues ENWW