HP Latex 360 Users Guide - Page 38
Introduction, Menu item, Sub-menu item, Values and Description, Config, Precedence
View all HP Latex 360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Menu item Information Security Sub-menu item Proxy Server Proxy Port Print Sec Page Secure Web Sub-menu item Secondary DNS Values and Description Use this item to specify an IPv6 address for a secondary DNS server that the print server should use. NOTE: This item will appear only if Manual configuration is a higher priority than DHCP in the Config Precedence table, configured through the embedded Web server. Specifies the proxy server to be used by embedded applications in the device. A proxy server is typically used by network clients for Internet access. It caches Web pages, and provides a degree of Internet security, for those clients. To specify a proxy server, enter its IPv4 address or fullyqualified domain name. The name can be up to 255 octets. For some networks, you may need to contact your Independent Service Provider (ISP) for the proxy server address. Type the port number used by the proxy server for client support. The port number identifies the port reserved for proxy activity on your network, and can be a value from 0 to 65535. Yes: Prints a page that contains the current security settings on the HP Jetdirect print server. No (default): A security settings page is not printed. For configuration management, specify whether the embedded Web server will accept communications using HTTPS (Secure HTTP) only, or both HTTP and HTTPS. HTTPS Required: For secure, encrypted communications, only HTTPS access is accepted. The print server will appear as a secure site. HTTP/HTTPS optional: Access using either HTTP or HTTPS is permitted. NOTE: The factory default setting depends on the print server model. 32 Chapter 1 Introduction ENWW