HP Latex 360 Users Guide - Page 89
The substrate has shrunk or expanded, The substrate has bow deformation
View all HP Latex 360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
● Increase the vacuum level in steps of 10 mmH2O. Do not exceed the following limits: 20 mmH2O for banners, 45 mmH2O for vinyl, and 60 mmH2O for other substrate families. ● Increase the number of passes. ● Make sure that the substrate is stored in the same room in which the printer is located. The substrate has shrunk or expanded During the printing process, some substrates may shrink, while others may expand. If this happens, the dimensions of the print will not be correct. As a general rule, you can expect the following percentages of shrinkage: ● Banner: less than 2% ● Self-adhesive vinyl: less than 0.5% ● Backlit: less than 0.5% ● Paper: less than 0.5% ● PP & PE synthetics: less than 1% The framing problem may be solved by printing a sample and adjusting the size of the image in the RIP. You may reuse this value for all your future prints with the same substrate, although special care must be taken when using banners, as the shrinkage may vary up to 1% depending on the amount of ink used in the print. You can expect the following variations from one print to another: ● Banner: less than 0.3% ● Self-adhesive vinyl: less than 0.1% ● Backlit: less than 0.05% ● Paper: less than 0.1% ● PP & PE synthetics: less than 0.4% To solve the tiling problem and improve the repeatability of the printed size (with the 360 or 370 printer only), you are recommended to ensure that the substrate-advance sensor is enabled in the RIP's substrate preset, as this will improve the stability of the prints over time. You are also recommended to tile together areas with similar amounts of ink. If this is not possible, print the areas with different amounts of ink as different jobs and modify the length of the job with less ink in the RIP to match its size with the job with high ink content. Some RIPs may provide a scaling option that allows you to compensate easily for substrate shrinkage or expansion; see your RIP documentation. The substrate has bow deformation The following substrates may suffer from bow deformation during printing, as a result of which the print will appear curved. ● Self-adhesive vinyl substrates (some specific calendared vinyls only) ● Cellulose-based poster papers with no backing nor coating, including HP Photorealistic This deformation may be particularly noticeable in the following applications. ENWW The substrate has shrunk or expanded 83