HP Latex 360 Users Guide - Page 76
Move substrate, attempt to pull
View all HP Latex 360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
7. Load the core onto the take-up reel. The core should be at least as wide as the substrate. 8. Load the take-up reel into the printer by pushing firmly on both ends. WARNING! Take care not to get your fingers trapped. Risk of trapped fingers For more safety information, please see Safety precautions on page 3 9. Advance the substrate by pressing the Move substrate button on the front panel. Make sure that the substrate passes in front of the loading table. 10. Pull down the center of the substrate's leading edge to straighten the substrate. Do not attempt to pull more substrate out of the printer. 70 Chapter 3 Handle the substrate and troubleshoot substrate issues ENWW
7.
Load the core onto the take-up reel. The core should be at least as wide as the substrate.
8.
Load the take-up reel into the printer by pushing firmly on both ends.
WARNING!
Take care not to get your fingers trapped.
Risk of trapped fingers
For more safety information, please see
Safety precautions
on page
3
9.
Advance the substrate by pressing the
Move substrate
button on the front panel. Make sure that the
substrate passes in front of the loading table.
10.
Pull down the center of the substrate's leading edge to straighten the substrate. Do
not
attempt to pull
more substrate out of the printer.
70
Chapter 3
Handle the substrate and troubleshoot substrate issues
ENWW