HP M4345 HP LaserJet M4345 MFP - Software Technical Reference (external) - Page 164

● Manual Feed in Tray 1 ● Tray 1 ● Tray 2 ● Tray 3 ● Tray 4 ● Tray 5 The default setting is Automatically Select. When this setting is selected, the HP LaserJet M4345 MFP uses the source tray that supports the selected media size. If you select a source tray other than Automatically select, make sure that the correct media size is loaded in the source tray. For information about media sources, see Media attributes. Type is: The Type is: drop-down menu shows all of the media types that the HP LaserJet M4345 MFP supports. When you use the default setting, Unspecified, the device uses the default media type, which is usually Plain. No mechanism exists for manually adding custom media types through the driver. Custom types can be added only by using the bidirectional communication mechanism, so they must already exist in the device when the bidirectional query occurs. If bidirectional communication is enabled, then the information an updated list of media types is returned. If bidirectional communication is not enabled, then the driver looks for custom media types that have been saved from a previous bidirectional communication query, and uses those. Otherwise, no custom media types are available through the driver. The following standard types appear in the list: ● Unspecified ● Plain ● Preprinted ● Letterhead ● Transparency ● Prepunched ● Labels ● Bond ● Recycled ● Color ● Light < 75 g/m2 (20 lb) ● Cardstock > 163 g/m2 (45 lb) ● Rough ● Envelope HP drivers for Windows 144 Chapter 5 HP PCL 6, PCL 5, and PS Emulation drivers for MS Windows ENWW