HP Mini 1125NR HP Mini 1000 Netbook - Maintenance and Service Guide - Page 45

Mass storage devices, Disconnect the USB board pass-through cable

Get HP Mini 1125NR PDF manuals and user guides View all HP Mini 1125NR manuals
Add to My Manuals
Save this manual to your list of manuals

Page 45 highlights

Mass storage devices NOTE: Each hard drive spare part kit and solid-state drive spare part kit includes a cable and bracket. Description 8-GB solid-state drive 16-GB solid-state drive 60-GB, 4200-rpm hard drive Spare part number 507313-001 507314-001 504601-001 Before removing the hard drive or solid-state drive, follow these steps: 1. Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the device. 3. Disconnect the power from the device by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the device. 4. Remove the battery (see Battery on page 32). 5. Remove the keyboard (see Keyboard on page 35). To remove the hard drive: 1. Release the ZIF connector (1) to which the USB board pass-through cable is attached. The cable lies across the top of the hard drive. 2. Disconnect the USB board pass-through cable (2), and then detach the tape from the top of the hard drive. 3. Release the low insertion force (LIF) connector (1) to which the hard drive cable is attached, and then disconnect the cable (2). Component replacement procedures 37

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
Mass storage devices
NOTE:
Each hard drive spare part kit and solid-state drive spare part kit includes a cable and bracket.
Description
Spare part number
8-GB solid-state drive
507313-001
16-GB solid-state drive
507314-001
60-GB, 4200-rpm hard drive
504601-001
Before removing the hard drive or solid-state drive, follow these steps:
1.
Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device
on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the device.
3.
Disconnect the power from the device by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the device.
4.
Remove the battery (see
Battery
on page
32
).
5.
Remove the keyboard (see
Keyboard
on page
35
).
To remove the hard drive:
1.
Release the ZIF connector
(1)
to which the USB board pass-through cable is attached. The cable
lies across the top of the hard drive.
2.
Disconnect the USB board pass-through cable
(2)
, and then detach the tape from the top of the
hard drive.
3.
Release the low insertion force (LIF) connector
(1)
to which the hard drive cable is attached, and
then disconnect the cable
(2)
.
Component replacement procedures
37