HP Mini 1125NR HP Mini 1000 Netbook - Maintenance and Service Guide - Page 47
and then remove the drive from the bracket, Reverse this procedure to install the solid-state drive.
View all HP Mini 1125NR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
4. Remove the two Phillips PM2.0×4.5 screws (3) that secure the drive bracket to the device, and then remove the bracket (4) from the drive bay. 5. Remove the three Phillips PM2.0×3.0 screws (1) that secure the solid-state drive to the bracket, and then remove the drive from the bracket (2). Reverse this procedure to install the solid-state drive. Component replacement procedures 39
4.
Remove the two Phillips PM2.0×4.5 screws
(3)
that secure the drive bracket to the device, and
then remove the bracket
(4)
from the drive bay.
5.
Remove the three Phillips PM2.0×3.0 screws
(1)
that secure the solid-state drive to the bracket,
and then remove the drive from the bracket
(2)
.
Reverse this procedure to install the solid-state drive.
Component replacement procedures
39