HP Model 715/80 hp 9000 series 700 model 715 workstations service handbook (a2 - Page 48
Changing the Built-In Graphics Configuration, Switches Models 715/C, 715/33, 715/50, 715/75
View all HP Model 715/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Changing the Built-In Graphics Configuration Switches (Models 715/C, 715/33, 715/50, 715/75) Figure 3-16 shows the built-in graphics configuration switch settings. Set the switches according to the type of monitor that is connected to the system unit's built- in graphics connector. First open the system unit, as described in Chapter 5, to allow a clear view of the switches. Use a small probe to set the switches through the access hole on the rear of the system unit. NOTICE: The built-in graphics configuration switches have no affect on the operation of the optional CRX graphics unit (if installed). Access Hole 20" Color 17" Color 19" Grayscale 15" Color (Model 715/33 only) Figure 3-16. Changing the Graphics Configuration Switches Configuration 3-17