HP Model 715/80 hp 9000 series 700 model 715 workstations service handbook (a2 - Page 70
Boot Command Notations, Supported Boot Paths
View all HP Model 715/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Boot Command Notations The BOOT command supports the following three notations: S Mnemonic S PA-RISC I/O S Path number Type help scsi or help lan for more information on the boot path parameters. Here are examples of mnemonic notation: S BOOT Return with "no parameters" selects the primary boot path in stable storage. S BOOT with the ALTERNATE or ALT parameter selects the alternate boot path in stable storage. Here are examples of PA-RISC I/O notation: S BOOT scsi.. or BOOT 2/0/1.. S BOOT lan...or BOOT 2/0/2... Here is an example of path number notation: S BOOT P1 Return attempts to boot from the second path indicated by the SEARCH command. Supported Boot Paths SCSI devices are bootable when connected to the SCSI port on the System card. Diskless workstations can only boot from the LAN port on the System card. 4-16 Troubleshooting