HP Nc4000 HP Compaq nc4010 Notebook PC - Maintenance and Service Guide - Page 103
attached and disconnect the keyboard cable, system board.
![]() |
View all HP Nc4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Removal and Replacement Procedures 10. Release the zero insertion force (ZIF) connector 1 to which the pointing stick cable is attached and disconnect the pointing stick cable 2 from the system board. 11. Release the ZIF connector 3 to which the keyboard cable is attached and disconnect the keyboard cable 4 from the system board. Removing the Keyboard 12. Remove the keyboard. Reverse the above procedure to install the keyboard. 5-24 Maintenance and Service Guide
![](/manual_guide/products/hewlettpackard-nc4000-hp-compaq-nc4010-notebook-pc-maintenance-service-guide-c978250/103.png)
5–24
Maintenance and Service Guide
Removal and Replacement Procedures
10. Release the zero insertion force (ZIF) connector
1
to which
the pointing stick cable is attached and disconnect the
pointing stick cable
2
from the system board.
11. Release the ZIF connector
3
to which the keyboard cable is
attached and disconnect the keyboard cable
4
from the
system board.
Removing the Keyboard
12. Remove the keyboard.
Reverse the above procedure to install the keyboard.