HP Nc4000 HP Compaq nc4010 Notebook PC - Maintenance and Service Guide - Page 87
Remove the two Torx T5 M2.5×4.5 screws, Use a 4.0-mm socket to remove the two M2.0×10.0
View all HP Nc4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Removal and Replacement Procedures c. Remove the two Torx T5 M2.5×4.5 screws 1 and the two PM2.5×3.5 screws 2 that secure the hard drive to the hard drive frame. d. Use a 4.0-mm socket to remove the two M2.0×10.0 alignment pins 3 from the back of the hard drive. Removing the Hard Drive from the Hard Drive Frame 5-8 Maintenance and Service Guide
5–8
Maintenance and Service Guide
Removal and Replacement Procedures
c.
Remove the two Torx T5 M2.5×4.5 screws
1
and the
two PM2.5×3.5 screws
2
that secure the hard drive to
the hard drive frame.
d.
Use a 4.0-mm socket to remove the two M2.0×10.0
alignment pins
3
from the back of the hard drive.
Removing the Hard Drive from the Hard Drive Frame