HP Nc4000 HP Compaq nc4010 Notebook PC - Maintenance and Service Guide - Page 125
cables from, and microphone
View all HP Nc4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
Removal and Replacement Procedures 11. Lift the rear edge 1 of the top cover until it disengages from the base enclosure. 12. Slide the top cover to the right 2 until the speaker and microphone cables are exposed. 13. Disconnect the speaker 3 and microphone 4 cables from the system board. 14. Remove the top cover. Removing the Top Cover Reverse the above procedure to install the top cover. 5-46 Maintenance and Service Guide
5–46
Maintenance and Service Guide
Removal and Replacement Procedures
11. Lift the rear edge
1
of the top cover until it disengages from
the base enclosure.
12. Slide the top cover to the right
2
until the speaker and
microphone cables are exposed.
13. Disconnect the speaker
3
and microphone
4
cables from
the system board.
14. Remove the top cover.
Removing the Top Cover
Reverse the above procedure to install the top cover.