HP Omni 10 5603cl HP Omni10 Maintenance and Service Guide - Page 33

Rear-facing webcamera

Get HP Omni 10 5603cl PDF manuals and user guides View all HP Omni 10 5603cl manuals
Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

Rear-facing webcamera Description Rear-facing webcamera (includes bracket and cable) Spare part number 739816-001 Before removing the rear-facing webcamera, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the back cover (see Back cover on page 19). 5. Disconnect the battery cable from the system board (see Power button board on page 20). Remove the rear-facing webcamera: 1. Release the ZIF connector (1) to which the rear-facing webcamera cable is attached, and then disconnect the rear-facing webcamera cable from the system board. 2. Remove the Phillips PM2.0×3.0 screw (2) that secures the rear-facing webcamera bracket to the tablet. 3. Lift the left side of the bracket (3) until it releases from the tab (4), and then remove the bracket (5). Removal and replacement procedures 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
Rear-facing webcamera
Description
Spare part number
Rear-facing webcamera (includes bracket and cable)
739816-001
Before removing the rear-facing webcamera, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
Back cover
on page
19
).
5.
Disconnect the battery cable from the system board (see
Power button board
on page
20
).
Remove the rear-facing webcamera:
1.
Release the ZIF connector
(1)
to which the rear-facing webcamera cable is attached, and then
disconnect the rear-facing webcamera cable from the system board.
2.
Remove the Phillips PM2.0×3.0 screw
(2)
that secures the rear-facing webcamera bracket to the
tablet.
3.
Lift the left side of the bracket
(3)
until it releases from the tab
(4)
, and then remove
the bracket
(5)
.
Removal and replacement procedures
27