HP Pavilion 11-ap0000 Maintenance and Service Guide - Page 35
USB/audio board
View all HP Pavilion 11-ap0000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
3. Remove the speakers (3). NOTE: When removing the speakers, make note of the location and condition of the four rubber isolators (4). These isolators are critical to the performance of the speakers. The absence of these isolators or damage to them can degrade the speaker performance. Reverse this procedure to install the speakers. USB/audio board Table 5-4 USB/audio board description and spare part number information Description Spare part number USB/audio board (The USB/audio board spare part kit does not include the USB/audio board cable. The USB/ L52056-001 audio board cable is available using spare part number L52063-001.) Before removing the USB/audio board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 23). 5. Disconnect the battery cable from the system board (see Battery on page 25). Component replacement procedures 27