HP Pavilion 11-ap0000 Maintenance and Service Guide - Page 49

Power button actuator, built into the keyboard

Get HP Pavilion 11-ap0000 PDF manuals and user guides View all HP Pavilion 11-ap0000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 49 highlights

Power button actuator Table 5-12 Power button actuator description and spare part number information Description Power button actuator Spare part number L52443-001 Before removing the power button actuator, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 23), and then remove the following components: a. Battery (see Battery on page 25) b. Solid-state drive (see Battery on page 25) c. System board (see System board on page 35) Remove the power button actuator: 1. Release the power button actuator spring arms (1) from the retention tabs (2) built into the keyboard/ top cover. 2. Press in on the power button actuator (3) to release it from the keyboard/top cover. 3. Remove the power button actuator. Reverse this procedure to install the power button actuator. Component replacement procedures 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
Power button actuator
Table 5-12
Power button actuator description and spare part number information
Description
Spare part number
Power button actuator
L52443-001
Before removing the power button actuator, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
23
), and then remove the following components:
a.
Battery (see
Battery
on page
25
)
b.
Solid-state drive (see
Battery
on page
25
)
c.
System board (see
System board
on page
35
)
Remove the power button actuator:
1.
Release the power button actuator spring arms
(1)
from the retention tabs
(2)
built into the keyboard/
top cover.
2.
Press in on the power button actuator
(3)
to release it from the keyboard/top cover.
3.
Remove the power button actuator.
Reverse this procedure to install the power button actuator.
Component replacement procedures
41