HP Pavilion 11-ap0000 Maintenance and Service Guide - Page 42
TouchPad, Remove the TouchPad
![]() |
View all HP Pavilion 11-ap0000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
TouchPad Table 5-8 TouchPad description and spare part number information Description TouchPad (The TouchPad spare part kit includes the TouchPad bracket, but does not include the TouchPad cable. The TouchPad cable is available using spare part number L52062-001.) Spare part number L52058-001 Before removing the TouchPad, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 23). 5. Remove the battery (see Battery on page 25). Remove the TouchPad: 1. Release the ZIF connector (1) to which TouchPad cable is connected, and then disconnect the TouchPad cable from the system board. 2. Remove the three Phillips M2.0×2.2 broad head screws (2) that secure the TouchPad to the keyboard/ top cover. 3. Remove the four Phillips M2.0×3.0 screws (3) that secure the TouchPad bracket to the keyboard/top cover. 4. Remove the TouchPad bracket (4). 5. Remove the TouchPad (5). 34 Chapter 5 Removal and replacement procedures
![](/manual_guide/products/hewlettpackard-pavilion-11m-maintenance-service-guide-7d6565c/42.png)