HP Pavilion 11-ap0000 Maintenance and Service Guide - Page 47

Memory shield, Remove the memory shield

Get HP Pavilion 11-ap0000 PDF manuals and user guides View all HP Pavilion 11-ap0000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 47 highlights

Memory shield Table 5-11 Memory shield description and spare part number information Description Memory shield Spare part number L52442-001 Before removing the memory shield, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 23), and then remove the following components: a. Battery (see Battery on page 25) b. Solid-state drive (see Battery on page 25) c. System board (see System board on page 35) Remove the memory shield: ▲ Detach the edges of the memory shield from the retention clips built into the system board, and then remove the memory shield. WARNING! The memory shield is constructed of metal and has sharp edges. Exercise care when handling the memory shield to prevent injuries. Reverse this procedure to install a memory shield. Component replacement procedures 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
Memory shield
Table 5-11
Memory shield description and spare part number information
Description
Spare part number
Memory shield
L52442-001
Before removing the memory shield, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer
on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
23
), and then remove the following components:
a.
Battery (see
Battery
on page
25
)
b.
Solid-state drive (see
Battery
on page
25
)
c.
System board (see
System board
on page
35
)
Remove the memory shield:
▲
Detach the edges of the memory shield from the retention clips built into the system board, and then
remove the memory shield.
WARNING!
The memory shield is constructed of metal and has sharp edges. Exercise care when handling
the memory shield to prevent injuries.
Reverse this procedure to install a memory shield.
Component replacement procedures
39