HP Pavilion 13-b200 Pavilion 13 Notebook PC - Page 40
CAUTION, keyboard cable from the system board.
View all HP Pavilion 13-b200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
8. Open the computer. CAUTION: Do not completely separate the keyboard/top cover from the bottom cover in the next step. There are 3 ribbon cables connecting the keyboard/top cover to the system board that can be damaged if too much separation is achieved. 9. Lift the front edge (1) of the keyboard/top cover until it (2) separates from the bottom cover. 10. Release the zero insertion force (ZIF) connector (1) to which the power button board cable is attached, and then disconnect the power button board cable from the system board. 11. Release the ZIF connector (2) to which the keyboard cable is attached, and then disconnect the keyboard cable from the system board. 12. Release the ZIF connector (3) to which the TouchPad assembly cable is attached, and then disconnect the TouchPad assembly cable from the system board. 13. Remove the keyboard/top cover. Reverse this procedure to install the keyboard/top cover. 30 Chapter 5 Removal and replacement procedures