HP Pavilion 13-b200 Pavilion 13 Notebook PC - Page 48

Fan, Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn

Get HP Pavilion 13-b200 PDF manuals and user guides View all HP Pavilion 13-b200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 48 highlights

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the keyboard/top cover (see Keyboard/top cover on page 28). 5. Disconnect the battery cable from the system board (see Battery on page 33). Remove the audio/USB board: 1. Release the ZIF connector (1) to which the audio/USB board cable is attached, and then disconnect the audio/USB board cable from the system board. 2. Detach the audio/USB board cable (2) from the battery. (The audio/USB board cable is attached to the battery with double-sided adhesive.) 3. Disconnect the speaker cable (3) from the audio/USB board. 4. Remove the Phillips PM2.4×5.7 screw (4) that secures the audio/USB board to the bottom cover. 5. Lift the right edge of the audio/USB board (5) and swing it up until it rests at an angle. 6. Remove the audio/USB board (6) by sliding it up and to the right at an angle. Fan Reverse this procedure to install the audio/USB board. Description Fan (includes cable) 38 Chapter 5 Removal and replacement procedures Spare part number 768021-001

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the keyboard/top cover (see
Keyboard/top cover
on page
28
).
5.
Disconnect the battery cable from the system board (see
Battery
on page
33
).
Remove the audio/USB board:
1.
Release the ZIF connector
(1)
to which the audio/USB board cable is attached, and then disconnect the
audio/USB board cable from the system board.
2.
Detach the audio/USB board cable
(2)
from the battery. (The audio/USB board cable is attached to the
battery with double-sided adhesive.)
3.
Disconnect the speaker cable
(3)
from the audio/USB board.
4.
Remove the Phillips PM2.4×5.7 screw
(4)
that secures the audio/USB board to the bottom cover.
5.
Lift the right edge of the audio/USB board
(5)
and swing it up until it rests at an angle.
6.
Remove the audio/USB board
(6)
by sliding it up and to the right at an angle.
Reverse this procedure to install the audio/USB board.
Fan
Description
Spare part number
Fan (includes cable)
768021-001
38
Chapter 5
Removal and replacement procedures