HP Pavilion 14-av000 Maintenance and Service Guide - Page 34

Battery, Disconnect the battery cable

Page 34 highlights

Battery Description 3-cell, 41-Wh, 3.61-Ah, Li-ion battery (includes cable) Spare part number 849908-850 Before removing the battery, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 24). Remove the battery: 1. Disconnect the battery cable (1) from the system board. 2. Remove the six Phillips M2.0×5.7 screws (2) that secure the battery to the keyboard/top cover. 3. Remove the battery (3). Reverse this procedure to install the battery. 26 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75

Battery
Description
Spare part number
3-cell, 41-Wh, 3.61-Ah, Li-ion battery (includes cable)
849908-850
Before removing the battery, follow these steps:
1.
Turn
off
the computer. If you are unsure whether the computer is
off
or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
24
).
Remove the battery:
1.
Disconnect the battery cable
(1)
from the system board.
2.
Remove the six Phillips M2.0×5.7 screws
(2)
that secure the battery to the keyboard/top cover.
3.
Remove the battery
(3)
.
Reverse this procedure to install the battery.
26
Chapter 5
Removal and replacement procedures