HP Pavilion 14-av000 Maintenance and Service Guide - Page 35

Hard drive, to which the hard drive cable is connected, and then

Get HP Pavilion 14-av000 PDF manuals and user guides View all HP Pavilion 14-av000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 35 highlights

Hard drive NOTE: The hard drive spare part kit does not include the hard drive brackets or the hard drive cable. The hard drive brackets are not spared separately. The hard drive cable is available using spare part number 856205-001. Description 2-TB, 5400-rpm, SATA, 9.5-mm hard drive 1-TB, 5400-rpm, SATA, 9.5-mm hard drive 500-GB, 5400-rpm, SATA, 7.0-mm hard drive Spare part number 801808-005 778192-005 778186-005 Before removing the hard drive, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 24). 5. Disconnect the battery cable from the system board (see Battery on page 26). Remove the hard drive: 1. Release the zero insertion force (ZIF) connector (1) to which the hard drive cable is connected, and then disconnect the hard drive cable from the system board. 2. Lift the right side of the hard drive (2) until it rests at an angle. 3. Remove the hard drive (3) by sliding it up and to the right at angle. 4. If it is necessary to replace the hard drive bracket, remove the left and right brackets (1). Component replacement procedures 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
Hard drive
NOTE:
The hard drive spare part kit does not include the hard drive brackets or the hard drive cable.
The hard drive brackets are not spared separately. The hard drive cable is available using spare part number
856205-001.
Description
Spare part number
2-TB, 5400-rpm, SATA, 9.5-mm hard drive
801808-005
1-TB, 5400-rpm, SATA, 9.5-mm hard drive
778192-005
500-GB, 5400-rpm, SATA, 7.0-mm hard drive
778186-005
Before removing the hard drive, follow these steps:
1.
Turn
off
the computer. If you are unsure whether the computer is
off
or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
24
).
5.
Disconnect the battery cable from the system board (see
Battery
on page
26
).
Remove the hard drive:
1.
Release the zero insertion force (ZIF) connector
(1)
to which the hard drive cable is connected, and then
disconnect the hard drive cable from the system board.
2.
Lift the right side of the hard drive
(2)
until it rests at an angle.
3.
Remove the hard drive
(3)
by sliding it up and to the right at angle.
4.
If it is necessary to replace the hard drive bracket, remove the left and right brackets
(1)
.
Component replacement procedures
27