HP Pavilion 14-av000 Maintenance and Service Guide - Page 42
System board, and installed on the replacement system board.
View all HP Pavilion 14-av000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
System board NOTE: The system board spare part kit includes the processor and replacement thermal material. Description Spare part number Equipped with an AMD A10-8700P 1.80-GHz (turbo up to 3.20-GHz) processor (1600-MHz FSB, 2.0-MB L2 cache, quad core, 15-W), an AMD Radeon R6 Graphics subsystem with UMA video memory, and the Windows 10 Professional operating system 860261-601 Equipped with an AMD A10-8700P 1.80-GHz (turbo up to 3.20-GHz) processor (1600-MHz FSB, 2.0-MB 860261-001 L2 cache, quad core, 15-W), an AMD Radeon R6 Graphics subsystem with UMA video memory, and a nonWindows operating system Equipped with an AMD A8-7410 2.20-GHz (turbo up to 2.50-GHz) processor (1600-MHz FSB, 2.0-MB L2 cache, quad core, 15-W), an AMD Radeon R5 Graphics subsystem with UMA memory, and the Windows 10 Professional operating system 860262-001 Equipped with an AMD A8-7410 2.20-GHz (turbo up to 2.50-GHz) processor (1600-MHz FSB, 2.0-MB L2 860262-001 cache, quad core, 15-W), an AMD Radeon R5 Graphics subsystem with UMA memory, and a non-Windows operating system Before removing the system board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 24), and then remove the following components: a. Battery (see Battery on page 26) b. WLAN module (see WLAN module on page 29) c. Fan (see Fan on page 33) NOTE: When replacing the system board, be sure that the memory module(s) (see Memory module on page 28) and the heat sink (see Heat sink on page 36) are removed from the defective system board and installed on the replacement system board. Remove the system board: 1. Disconnect the following cables from the system board: (1) Display panel ZIF connector cable (2) Hard drive ZIF connector cable (3) TouchPad ZIF connector cable (4) Keyboard ZIF connector cable (5) Card reader board ZIF connector cable (6) Speaker cable 34 Chapter 5 Removal and replacement procedures