HP Pavilion 14-av000 Maintenance and Service Guide - Page 48
Power connector cable
View all HP Pavilion 14-av000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Reverse this procedure to install the speakers. Power connector cable Description Power connector cable Spare part number 808155-010 Before removing the power connector cable, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 24), and then remove the following components: a. Battery (see Battery on page 26) b. WLAN module (see WLAN module on page 29) c. Fan (see Fan on page 33) d. System board (see System board on page 34) Remove the power connector cable: ▲ Remove the power connector cable. Reverse this procedure to install the power connector cable. 40 Chapter 5 Removal and replacement procedures