HP Pavilion 14-v200 Pavilion 14 Notebook PC Maintenance and Service Guide - Page 76

removed. Replacement thermal material is included with the heat sink assembly and system board

Get HP Pavilion 14-v200 PDF manuals and user guides View all HP Pavilion 14-v200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 76 highlights

Reverse this procedure to install the heat sink assembly on computer models equipped with switchable discrete graphics. 5. Remove the four Phillips PM2.5x4.0 screws (1) that secure the heat sink assembly to the system board. 6. Remove the heat sink assembly (2). NOTE: Due to the adhesive quality of the thermal material located between the heat sink assembly and system board components, it may be necessary to move the heat sink assembly from side to side to detach it. 7. Remove the thermal material. The thermal material must be thoroughly cleaned from the surfaces of the heat sink assembly and the system board components each time the heat sink assembly is removed. Replacement thermal material is included with the heat sink assembly and system board spare part kits. Thermal paste is used on the processor (1) and the heat sink assembly section (2) that services it. 66 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
Reverse this procedure to install the heat sink assembly on computer models equipped with switchable
discrete graphics.
5.
Remove the four Phillips PM2.5x4.0 screws
(1)
that secure the heat sink assembly to the system board.
6.
Remove the heat sink assembly
(2)
.
NOTE:
Due to the adhesive quality of the thermal material located between the heat sink assembly
and system board components, it may be necessary to move the heat sink assembly from side to side to
detach it.
7.
Remove the thermal material. The thermal material must be thoroughly cleaned from the surfaces of
the heat sink assembly and the system board components each time the heat sink assembly is
removed. Replacement thermal material is included with the heat sink assembly and system board
spare part kits. Thermal paste is used on the processor
(1)
and the heat sink assembly section
(2)
that
services it.
66
Chapter 6
Removal and replacement procedures for Authorized Service Provider parts