HP Pavilion 14-v200 Pavilion 14 Notebook PC Maintenance and Service Guide - Page 81

that secure the display assembly to the base enclosure., Remove the three Phillips PM2.5×4.0 screws

Get HP Pavilion 14-v200 PDF manuals and user guides View all HP Pavilion 14-v200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 81 highlights

a. Service door (see Service door on page 38) b. Optical drive (see Optical drive on page 40) c. Top cover (see Top cover on page 47) Remove the display assembly: 1. Disconnect the display cable (1) by flipping open the connector and lifting the cable. 2. Release the wireless antenna cables from the clips (2) built into the base enclosure. 3. Remove the three Phillips PM2.5×4.0 screws (3) that secure the display assembly to the base enclosure. 4. Remove the display assembly (4). If it is necessary to replace any of the display assembly subcomponents: 1. If it is necessary to replace the webcamera/microphone module: a. Disconnect the webcamera/microphone module cable (1) from the webcamera/microphone module. (The webcamera/microphone module cable is part of the display panel cable.) Component replacement procedures 71

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
a.
Service door (see
Service door
on page
38
)
b.
Optical drive (see
Optical drive
on page
40
)
c.
Top cover (see
Top cover
on page
47
)
Remove the display assembly:
1.
Disconnect the display cable
(1)
by flipping open the connector and lifting the cable.
2.
Release the wireless antenna cables from the clips
(2)
built into the base enclosure.
3.
Remove the three Phillips PM2.5×4.0 screws
(3)
that secure the display assembly to the base enclosure.
4.
Remove the display assembly
(4)
.
If it is necessary to replace any of the display assembly subcomponents:
1.
If it is necessary to replace the webcamera/microphone module:
a.
Disconnect the webcamera/microphone module cable
(1)
from the webcamera/microphone
module. (The webcamera/microphone module cable is part of the display panel cable.)
Component replacement procedures
71