HP Pavilion 15-ab100 Pavilion Notebook AMD Maintenance and Service Guide - Page 77

Display assembly, touch, Remove the two Phillips PM2.5×5.0 screws

Get HP Pavilion 15-ab100 PDF manuals and user guides View all HP Pavilion 15-ab100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 77 highlights

Display assembly, touch Before removing the display assembly, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 31). 5. Remove the optical drive (see Optical drive on page 32). 6. Remove the bottom cover (see Bottom cover on page 36). 7. Remove the system board (see System board on page 53). To remove the display assembly: 1. Position the computer on its side, partially open. 2. Remove the two Phillips PM2.5×5.0 screws (1) that secure the display assembly to the computer. 3. Open the display to rotate the hinges upward to an angle (2). 4. Separate the display assembly from the computer (3). If it is necessary to replace any of the display assembly subcomponents: 1. To remove the display cover: a. Pry up on each side of the display to disengage the cover (1). Component replacement procedures 69

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
Display assembly, touch
Before removing the display assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is
off
or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by
first
unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery
on page
31
).
5.
Remove the optical drive (see
Optical drive
on page
32
).
6.
Remove the bottom cover (see
Bottom cover
on page
36
).
7.
Remove the system board (see
System board
on page
53
).
To remove the display assembly:
1.
Position the computer on its side, partially open.
2.
Remove the two Phillips PM2.5×5.0 screws
(1)
that secure the display assembly to the computer.
3.
Open the display to rotate the hinges upward to an angle
(2)
.
4.
Separate the display assembly from the computer
(3)
.
If it is necessary to replace any of the display assembly subcomponents:
1.
To remove the display cover:
a.
Pry up on each side of the display to disengage the cover
(1)
.
Component replacement procedures
69