HP Pavilion 15-ab200 Maintenance and Service Guide - Page 77
Power connector cable, To remove the power connector cable
View all HP Pavilion 15-ab200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Power connector cable Description Power connector cable Power connector cable for use in Star Wars Special Edition models Spare part number 806746-001 837610-001 Before removing the power connector cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 40). 5. Remove the optical drive (see Optical drive on page 41). 6. Remove the bottom cover (see Bottom cover on page 44). 7. Remove the system board (see System board on page 62). To remove the power connector cable: 1. Remove the Phillips PM2.5×3.0 screw (1) from the left hinge that sits above the power connector. 2. Rotate the hinge upward (2). 3. Pull the tab away from the connector (3), and then remove the power connector and cable (4) from the computer. Component replacement procedures 69