HP Pavilion 15-ab200 Maintenance and Service Guide - Page 78
TouchPad, Reverse this procedure to install the power connector cable.
View all HP Pavilion 15-ab200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Reverse this procedure to install the power connector cable. TouchPad Description TouchPad Spare part number 813987-001 Before removing the TouchPad, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 40). 5. Remove the optical drive (see Optical drive on page 41). 6. Remove the bottom cover (see Bottom cover on page 44). 7. Remove the system board (see System board on page 62). To remove the TouchPad: 1. Remove the three Phillips PM2.5×3.0 screws (1) that secure the TouchPad bracket to the computer. 2. Remove the bracket (2). 3. Lift the keyboard cable (1) to gain access to the TouchPad screws. 70 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts