HP Pavilion 15-b100 HP Pavilion 15 Sleekbook Maintenance and Service Guide - Page 74
Power connector cable, Reverse this procedure to reassemble and install the display assembly.
View all HP Pavilion 15-b100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Reverse this procedure to reassemble and install the display assembly. Power connector cable Description Power connector cable Spare part number 701682-001 IMPORTANT: Make special note of each screw and screw lock size and location during removal and replacement. Before removing the power connector cable, follow these steps: 1. Shut down the computer. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 30). 5. Remove the keyboard (see Keyboard on page 31). 6. Remove the top cover (see Top cover on page 35). 7. Remove the hard drive (see Hard drive on page 39). 8. Remove the USB board (see USB board on page 41). 9. Remove the WLAN (see WLAN module on page 42). 10. Remove the system board (see System board on page 45). Remove the power connector cable: NOTE: The power connector cable screw and bracket were removed during the process to remove the system board. 1. Release the power connector cable (1). 2. Lift out the power connector cable (2) to remove it from the base enclosure. 66 Chapter 4 Removal and replacement procedures