HP Presario 300 Presario 305 Series Maintenance and Service Guide - Page 21
Service Considerations - drivers
View all HP Presario 300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Presario 305 Model Before You Begin Removal Sequence Product Description Specifications Troubleshooting Pin Assignments Parts Catalog Battery Operations Index Service Considerations Listed below are some of the considerations that you should keep in mind during the disassembly and reassembly of the computer. Tool and Software Requirements To service the computer, you need the following: q Compaq screwdriver kit q Torx T-8 screwdriver q 3/16-inch and 5mm nut drivers (for screwlocks and standoffs) q Small, standard screwdriver q Small, Phillips screwdriver q Diagnostics software Screws The screws used in the computer are not interchangeable. If an incorrect screw is used during the reassembly process, it can damage the unit. Compaq strongly recommends that all screws removed during disassembly be kept with the part that was removed, then returned to their proper locations. Fan and RJ11 The Fan and RJ11 are spared with the base assembly. They are not available separately, and may only be obtained by ordering the entire base assembly. This Maintenance and Service Guide contains no removal and replacement procedures for these components. As each subassembly is removed from the computer, IMPORTANT: it should be placed away from the work area to prevent damage. Return to Removal & Replacement Procedures