HP Presario 300 Presario 305 Series Maintenance and Service Guide - Page 52
Removing the PC Card Assembly
![]() |
View all HP Presario 300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Before You Begin Removal Sequence Product Description Presario 305 Model Specifications Troubleshooting Pin Assignments Removing the PC Card Assembly Removal Sequence Serial Number Location Preparing for Disassembly Electrostatic Discharge Service Considerations Cables and Connectors Multi-media Expansion Unit Battery Pack Hard Drive Modem Card RTC Battery Keyboard Memory Board Switch Cover Display Panel Deck Voltage Converter Board Modem Connector Board PC Card PC Card Assembly System Board Parts Catalog Battery Operations Index 1. Remove the modem card. 2. Remove the keyboard. 3. Remove the switch cover. 4. Remove the display. 5. Remove the deck. 6. Remove the modem connector board. 7. Remove the two silver (t8) screws on the left side of the PC card assembly. 8. Remove the black (t8) screw that secures the front of the PC card assembly to the base assembly. 9. Lift up on the left side of the PC card assembly to disconnect the assembly from the system board. Be sure to route the audio and light board cables between the PC NOTE: card assembly and the base plastic. Do not route near the heat sink.
![](/manual_guide/products/hewlettpackard-presario-300-presario-305-series-maintenance-service-guide-b2ce1e9/52.png)