HP Pro 3420 PC Maintenance & Service Guide - Page 62
Removing the WLAN antennas from the routing path
View all HP Pro 3420 PC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
5. Remove screw (2) that secures the module to the computer. 6. Lift the module to a 45-degree angle, and then pull it away to remove it from the socket (3) Figure 7-23 Removing the WLAN module NOTE: WLAN modules are designed with a notch to prevent incorrect insertion. 7. If you need to replace the WLAN antennas, remove them from the routing path built into the computer. Figure 7-24 Removing the WLAN antennas from the routing path 54 Chapter 7 Removal and Replacement Procedures All-in One (AIO) Chassis
5.
Remove screw
(2)
that secures the module to the computer.
6.
Lift the module to a 45-degree angle, and then pull it away to remove it from the socket
(3)
Figure 7-23
Removing the WLAN module
NOTE:
WLAN modules are designed with a notch to prevent incorrect insertion.
7.
If you need to replace the WLAN antennas, remove them from the routing path built into the
computer.
Figure 7-24
Removing the WLAN antennas from the routing path
54
Chapter 7
Removal and Replacement Procedures All-in One (AIO) Chassis