HP Pro 3420 PC Maintenance & Service Guide - Page 77
Front Bezel, Preparing to Disassemble the Computer, on Rear Cover, System Board Cover, Speakers
View all HP Pro 3420 PC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Front Bezel Description Front bezel for use in models with a webcam Front bezel for use in models without a webcam Spare part number 667106-001 667107-001 The front bezel is located on the front of the computer and is secured to the display panel bracket with five screws. You can remove the bezel without removing most of the main computer components, which the following procedure demonstrates. To remove the front bezel while removing the minimal number of components: 1. Prepare the computer for disassembly (see Preparing to Disassemble the Computer on page 33). 2. Remove the rear cover (see Rear Cover on page 34). 3. Remove the system board cover (1) (see System Board Cover on page 49). 4. Remove the speakers (2) (see Speakers on page 66). 5. Remove the 5 screws (3) that secure the bezel to the computer. 6. Lift the 6 tabs that secure the bezel to the computer (5). Figure 7-38 Removing the front bezel 7. Lift the computer from the bezel. To install the front bezel, reverse the removal procedures. Front Bezel 69