HP ProBook x360 Maintenance and Service Guide - Page 40

Solid-state drive, Remove the Phillips M1.6 × 2.0 screw

Get HP ProBook x360 PDF manuals and user guides View all HP ProBook x360 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

Table 5-3 Touchpad description and part number Description NOTE: The touchpad cable is available in the Cable Kit, spare part number M03431-001. Spare part number Before removing the touchpad, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 29). 2. Remove the bottom cover (Bottom cover on page 29). 3. Remove the battery (see Battery on page 30). Remove the touchpad: 1. Disconnect the cable from the ZIF connector on the touchpad (1). 2. Lift the protective shielding from the top of the touchpad (2). 3. Remove the four Phillips M2.0 × 3.0 screws (3) that secure the touchpad to the computer. 4. Remove the Phillips M1.6 × 2.0 screw (4) that secures the touchpad to the computer. 5. Remove the touchpad from the computer (5). Reverse this procedure to install the touchpad. Solid-state drive To remove the M.2 solid-state drive, use this procedure and illustration. Table 5-4 Solid-state drive descriptions and part numbers Description 512 GB, PCIe, TLC 512 GB, PCIe, value 32 Chapter 5 Removal and replacement procedures for authorized service provider parts Spare part number L85360-002 L85364-002

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
Table 5-3
Touchpad description and part number
Description
Spare part number
NOTE:
The touchpad cable is available in the Cable Kit, spare part number M03431-001.
Before removing the touchpad, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly
on page
29
).
2.
Remove the bottom cover (
Bottom cover
on page
29
).
3.
Remove the battery (see
Battery
on page
30
).
Remove the touchpad:
1.
Disconnect the cable from the ZIF connector on the touchpad
(1)
.
2.
Lift the protective shielding from the top of the touchpad
(2)
.
3.
Remove the four Phillips M2.0 × 3.0 screws
(3)
that secure the touchpad to the computer.
4.
Remove the Phillips M1.6 × 2.0 screw
(4)
that secures the touchpad to the computer.
5.
Remove the touchpad from the computer
(5)
.
Reverse this procedure to install the touchpad.
Solid-state drive
To remove the M.2 solid-state drive, use this procedure and illustration.
Table 5-4
Solid-state drive descriptions and part numbers
Description
Spare part number
512 GB, PCIe, TLC
L85360-002
512 GB, PCIe, value
L85364-002
32
Chapter 5
Removal and replacement procedures for authorized service provider parts