HP ProBook x360 Maintenance and Service Guide - Page 47

Rear camera module and board, and then remove the cable from the clip

Page 47 highlights

Table 5-7 RTC battery description and part number Description RTC battery Spare part number L13694-001 Before removing the RTC battery, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 29). 2. Remove the bottom cover (Bottom cover on page 29). 3. Remove the battery (see Battery on page 30). Remove the RTC battery: 1. Disconnect the RTC battery cable from the system board (1), and then remove the cable from the clip (2). 2. Remove the RTC battery from the computer (3). Reverse this procedure to install the RTC battery. Rear camera module and board To remove the rear camera and board, use this procedure and illustration. Table 5-8 Rear camera and board description and part number Description Spare part number Rear camera and camera board M03443-001 NOTE: The camera cable is included in the Cable Kit, spare part number M03431-001. The camera bracket is included in the Bracket Kit, spare part number M03436-001. The camera thermal shield is included in the Plastics Kit, spare part number M03437-001. Before removing the rear camera and camera board, follow these steps: Component replacement procedures 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92

Table 5-7
RTC battery description and part number
Description
Spare part number
RTC battery
L13694-001
Before removing the RTC battery, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly
on page
29
).
2.
Remove the bottom cover (
Bottom cover
on page
29
).
3.
Remove the battery (see
Battery
on page
30
).
Remove the RTC battery:
1.
Disconnect the RTC battery cable from the system board
(1)
, and then remove the cable from the clip
(2)
.
2.
Remove the RTC battery from the computer
(3)
.
Reverse this procedure to install the RTC battery.
Rear camera module and board
To remove the rear camera and board, use this procedure and illustration.
Table 5-8
Rear camera and board description and part number
Description
Spare part number
Rear camera and camera board
NOTE:
The camera cable is included in the Cable Kit, spare part number M03431-001. The camera bracket
is included in the Bracket Kit, spare part number M03436-001. The camera thermal shield is included in the
Plastics Kit, spare part number M03437-001.
M03443-001
Before removing the rear camera and camera board, follow these steps:
Component replacement procedures
39