HP ProDesk 600 Hardware Reference Guide - Page 73
back and forth until the connectors pull free from the socket. Pull the expansion card
View all HP ProDesk 600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
9. Before installing an expansion card, remove the expansion slot cover or the existing expansion card. NOTE: Before removing an installed expansion card, disconnect any cables that may be attached to the expansion card. a. If you are installing an expansion card in a vacant socket, remove the appropriate expansion slot cover on the back of the chassis. Pull the slot cover straight up then away from the inside of the chassis. b. If you are removing a PCI Express x1 card, hold the card at each end, and carefully rock it back and forth until the connectors pull free from the socket. Pull the expansion card straight up from the socket (1) then away from the inside of the chassis to release it from the chassis frame (2). Be sure not to scrape the card against the other components. ENWW Removing or installing an expansion card 65