HP ProLiant CL1850 Compaq ProLiant CL1850 Software User Guide - Page 14
Configuring Server Node 2, Arrow down to Compaq 64-Bit Dual Channel Wide Ultra2 SCSI
View all HP ProLiant CL1850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
1-4 Compaq ProLiant CL1850 Software User Guide 21. To ensure that the latest Compaq drivers have not been overwritten by the service pack, rerun the Server Support Software. Configuring Server Node 2 1. Press Print Screen to access the KVM (Keyboard/Video/Mouse) switch and choose server node 2 from the list. NOTE: For detailed instructions on using the KVM switch, refer to the Compaq ProLiant CL1850 User Guide. 2. Boot server node 2 with the SmartStart CD in the CD-ROM drive. 3. When the system boots, you will see the Select Language screen. Select which language you would like to use and follow the installation process. 4. When prompted to select an installation path, select the Assisted Integration path. Follow the guided installation process. If you need help, refer to the online help by clicking on the Help button. After the operating system has been selected, SmartStart runs the System Configuration Utility and configures the server node's hardware. It is very important that the adapter card in each server node connected to the shared storage RAID controller have a unique SCSI ID number. IMPORTANT: Server node 2 cannot have the same SCSI ID as server node 1. For example, if server node 1 is set for SCSI ID 7 then server node 2 must be set to ID 6. 5. To verify or change the SCSI ID number after the system configuration is done, select Review or Modify Hardware Settings then press Enter. This allows you to see all of the hardware settings. 6. Select Step 3: View or Edit Details. 7. Arrow down to Compaq 64-Bit Dual Channel Wide Ultra2 SCSI Controller (Port1). Underneath this heading is a subheading titled SCSI ID. To change the SCSI ID setting, highlight the SCSI ID option then press Enter. After making a new selection, press Enter to accept the change. 8. Press F10 to exit. 9. Select Step 5: Save and Exit then press Enter. 10. The Product Selection window appears. Continue to follow the guided installation process, selecting options as needed. If you need help, refer to the online help by clicking on the Help button.