HP ProLiant DL380 Compaq ProLiant DL380 Generation 2 Server High-Density Deplo - Page 43

Compaq ProLiant DL380 Generation 2 Server High-Density Deployment in Compaq Racks 43 Compaq Confidential - Need to Know Required Appendix D − Connecting Multiple Racks Compaq offers baying or coupling kits designed to connect two or more 7000- or 9000-series racks side by side. When coupling two or more racks, only install the side panels on the outsides of the end racks. The following tables list the rack-deployment option kits for 7000- and 9000-series racks. Refer to the Compaq ProLiant DL380 Generation 2 Quick Specs for the most recent options available. Table 22 lists rack-deployment options for 7000-series racks. Table 23 lists rack-deployment options for 9000-series racks. Table 22. Rack Deployment Options for 7000-Series Racks 7000-Series Rack Options Compaq Part # 7000 Extension Bustle kit 154392-B21 The extension kit for the 7142 rack includes a steel collar that attaches to the front and/or rear of the rack, enabling additional space in the rack for large equipment or cable management. Rack Side Wall kit (42U only) 165652-001 This kit includes two rack side panels for the 7142 rack. Coupling kit 165664-001 Use this kit to join two or more racks to create a multi-bay configuration. The kit supports 24inch and 600-mm floor tile spacing. Sides of adjacent rack frames are connected, and side panels are installed on the two ends of the multi-bay configuration. Rack Stabilizing Feet kit (42U only) 189907-001 High Air-Flow Rack Door Insert 7122: 157847-B21 This kit enables proper ventilation to effectively cool a high-volume deployment of ProLiant DL320 servers. 7142: 327281-B21 7142 6 pack: 327281-B22 Table 23. Rack Deployment Options for 9000-Series Racks 9000-Series Rack Options Baying/Coupling kit Use this kit to join two or more racks to create a multi-bay configuration. The kit supports 24inch and 600-mm floor tile spacing. Sides of adjacent rack frames are connected, and side panels are installed on the two ends of the multi-bay configuration. Stabilizer kit The anti-tip stabilizer kit provides stability and support when equipment is installed, removed, or accessed within the rack. Compaq highly recommends using a stabilizer kit with a standalone rack. Ballast kit The ballast kit provides additional stability and support for the stabilizer kit. Use the ballast kit if heavy equipment is routinely installed, removed, or accessed within the rack. A ballast kit must be assembled with a ballast installed on each side of the rack. Extension Bustle kit The extension bustle kit attaches to the rear of the rack providing an additional 8.6 cm (3.9 in) of space to the depth of the rack. This option enables more space for cable management or extended equipment installed in the rack. continued Compaq Part # 120669-B21 120673-B21 120672-B21 120679-B21 14UH-0701A-WWEN