HP Q1581A HP DDS/DAT drives UNIX, Linux and OpenVMS configuration guide (DW049 - Page 26
BLOCK Size = 0, Use EXTENDED file marks = no
UPC - 882780612716
View all HP Q1581A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
3. A pop-up window is displayed: Select "ost" or "Other SCSI tape drive" as the tape drive you wish to change. If no device has been configured at this address before, choose connection addresses as appropriate. 4. The following details are displayed: Check the following values and change them if necessary: • BLOCK Size = 0 • Use EXTENDED file marks = "no" • RESERVE/RELEASE support = "yes" • Set maximum delay for the READ/WRITE command = 1200 Click on the "DO" button to apply the changes. 26 IBM (AIX) servers and workstations
IBM (AIX) servers and workstations
26
3.
A pop-up window is displayed:
Select “
ost
” or “
Other SCSI tape drive
” as the tape drive you wish to change.
If no device has been configured at this address before, choose connection addresses as
appropriate.
4.
The following details are displayed:
Check the following values and change them if necessary:
•
BLOCK Size = 0
•
Use EXTENDED file marks = “no”
•
RESERVE/RELEASE support = “yes”
•
Set maximum delay for the READ/WRITE command = 1200
Click on the “DO” button to apply the changes.