HP SignagePlayer mp8000s Maintenance & Service Guide: HP SignagePlayer mp8 - Page 156
Control panel message, Description, Recommended action, Network Server Mode Active and No
View all HP SignagePlayer mp8000s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
Table C-1 Numeric Codes and Text Messages (continued) Control panel message Description 2204-Inventory error during MEBx execution BIOS information passed to the MEBx resulted in a failure. 2205-Interface error during MEBx execution MEBx operation experienced a hardware error during communication with ME. 2211-Memory not configured correctly for proper MEBx execution. DIMM1 is not installed. Invalid Electronic Serial Number Electronic serial number is missing. Network Server Mode Active and No Keyboard Attached Keyboard failure while Network Server Mode enabled. Parity Check 2 Parity RAM failure. Recommended action 1. Reboot the computer. 2. If the error persists, update to the latest BIOS version. 3. If the error still persists, replace the system board. 1. Reboot the computer. 2. If the error persists, update to the latest BIOS version. 3. If the error still persists, replace the system board. Make sure there is a memory module in the black DIMM1 socket and that it is properly seated. Enter the correct serial number in Computer Setup. 1. Reconnect keyboard with computer turned off. 2. Check connector for bent or missing pins. 3. Ensure that none of the keys are depressed. 4. Replace keyboard. Run Computer Setup and Diagnostic utilities. 146 Appendix C POST Error Messages