HP StorageWorks 1000i HP StorageWorks 1000i Virtual Library System User Guide - Page 31
guring, VLS1000i
View all HP StorageWorks 1000i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
3 Configuring the VLS1000i This section describes how to configure the VLS server. It is comprised of the following topics: • Reviewing pre-Installation requirements • Powering up the VLS • Configuring the VLS • Creating virtual devices • Connecting devices (targets) to backup hosts (initiators) Reviewing pre-installation requirements Before attempting to operate the VLS with your backup servers, verify that the iSCSI initiator and the browser meet the minimum requirements. iSCSI initiators iSCSI initiators are required to communicate with the iSCSI targets (VLS Devices) on the VLS. Each backup server that will interface with the VLS must be equipped with a software- or hardware-based initiator. The VLS supports the Windows 2003 platform server with an available iSCSI initiator, either in software or using an iSCSI HBA (it must be iSCSI draft 20/version 1.0). Browser The VLS GUI is a Web-enabled program that requires the use of cookies, Java applets, and Java scripts. Make sure that the Web browser you use is configured to allow these items. Verifying the settings in Internet Explorer 1. Launch Microsoft Internet Explorer. 2. In the Tools menu, click Internet Options. 3. On the Security tab, click Custom Level. HP StorageWorks 1000i Virtual Library System 31