HP StorageWorks 1000i HP StorageWorks 1000i Virtual Library System User Guide - Page 45
Obtaining, iSCSI, address
View all HP StorageWorks 1000i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Figure 32 iSCSI initiator properties 12. Click OK. The Microsoft iSCSI Initiator is now installed and configured to work with your VLS on this client. Repeat this procedure on each client that will access the VLS. Obtaining iSCSI address from host Each device created is associated with one backup host. In order to use the VLS, backup hosts must be set up as iSCSI initiators. See Deploying iSCSI initiators for instructions on deploying iSCSI initiators. NOTE: The following process presents associating devices and backup hosts using the Microsoft iSCSI Software Initiator. The steps and screens may be different depending on the iSCSI solution on your system. The following steps show how to associate devices with backup hosts. 1. On the host you want to associate with the device being created, select Start > Microsoft iSCSI Initiator > Microsoft iSCSI Initiator. 2. The iSCSI Initiator Properties window displays. On the General tab is listed the Initiator Node Name. See Figure 33. HP StorageWorks 1000i Virtual Library System 45