HP StorageWorks 1500cs HP StorageWorks 1500 Modular Smart Array maintenance an - Page 39
Restarting System, Flashing Done
View all HP StorageWorks 1500cs manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Message 10 FIRMWARE FLASH FAILED 11 CLONING REFUSED SYSTEM HALTED 12 ONLINE UPGRADE FLASHING FIRMWARE 13 ONLINE UPGRADE FLASHING STARTED 14 ONLINE UPGRADE FLASHING DONE 15 ONLINE UPGRADE FLASHING FAILED 16 ONLINE UPGRADE RESTARTING SYSTEM 17 ONLINE UPGRADE COMPLETE 18 ONLINE UPGRADE INCOMPLETE 19 ONLINE UPGRADE REDUNDANCY HALTED 20 INITIALIZING SCSI SUBSYSTEM 21 SCANNING FOR SCSI DEVICES 22 INITIALIZING SCSI DEVICES Type Error Error Informational Informational Informational Error Informational Informational Error Informational Informational Informational Informational Description Action ROM flash failed. Download new firmware from the HP website and initiate the firmware update again. If the issue persists, contact HP support. A firmware mismatch was detected, message 07 CLONE FIRMWARE? ''=YES was displayed, and the user selected < for "No". Firmware on the controllers must be updated to be the same. An online firmware update is starting. An online firmware update is in progress. An online firmware update has completed. An online firmware update has failed. Download new firmware from the HP website and initiate the firmware update again. If the issue persists, contact HP support. An online firmware update is forcing an automatic restart of the system. An online firmware update has completed successfully. An online firmware update was successful, but a subsequent step failed. In dual-controller configurations, this may cause the other to not update properly. Restart the system. In dual-controller configurations, if the 07 CLONE FIRMWARE? ''=YES message is displayed, select >. In dual-controller configurations, each controller restarts at least once during an online firmware update. During these restarts, the system is not redundant. The SCSI subsystem is being initialized as part of the power-on sequence. The MSA is scanning for any attached SCSI devices as part of the power-on sequence. The MSA is initializing all discovered SCSI devices as part of the power on sequence. maintenance and service guide 39