HP StorageWorks 1500cs HP StorageWorks 1500 Modular Smart Array maintenance an - Page 54
Recovery Rom, Autoflash Done, Autoflash Failed, Rom Cloning, Started, Failed, The Rom Auto
View all HP StorageWorks 1500cs manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Message 301 RECOVERY ROM AUTOFLASH DONE 302 RECOVERY ROM AUTOFLASH FAILED 303 ROM CLONING STARTED 304 ROM CLONING DONE 305 ROM CLONING FAILED Type Informational Error Informational Informational Error Description Action The array controller has successfully completed the process of copying the current active firmware image into the backup recovery ROM. The array controller failed to copy the current active firmware image into the backup recovery ROM. Recovery ROM support is disabled. Remove the failing array controller, wait 10 seconds, and then reinsert the array controller, ensuring that it is fully seated in the chassis. The ROM autoflash process is attempted again. Should the issue persist, contact HP support. In dual-controller MSA only, this indicates that the firmware from one of the controllers is being copied onto the other array controller. Both controllers must be running the same version of firmware in order for controller redundancy to operate. If both array controllers are in the power-up sequence, then the most recent version of firmware will be used. If one array controller has already completed the power-up sequence and is active, then its version of firmware will be used even if less recent. In dual-controller MSA only, this indicates that the two array controllers in an MSA have finished copying one array controller's version of firmware to the other array controller. Both controllers must be running the same version of firmware in order for controller redundancy to operate. In dual-controller MSA only, this indicates that the two array controllers in an MSA failed to copy one array controller's version of firmware to the other array controller. Both controllers must be running the same version of firmware in order for controller redundancy to operate. Remove the standby array controller, wait 10 seconds, and then reinsert the array controller ensuring that it is fully seated in the chassis. The ROM cloning process is attempted again. Should the issue persist, contact HP support. 54 LCD panel and message descriptions