HP StorageWorks 1500cs HP StorageWorks 1500 Modular Smart Array maintenance an - Page 92
Installing the component, Verifying proper operation, Replacing the MSA1500 chassis
View all HP StorageWorks 1500cs manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
3. While pressing the power supply module latch (1) to the left, grasp the module handle and pull the defective power supply out of the chassis (2). 1 2 15494 Installing the component 1. Slide the replacement power supply module into the MSA chassis bay until the module clicks into place. 15495 2. Connect the AC power cord to the power supply. Verifying proper operation After replacing the power supply, verify that: • The power supply Status LED is solid green. • No new error messages are displayed on the array controller LCD panel. Replacing the MSA1500 chassis In the event of a backplane board failure, a new chassis must be ordered. All original component parts of the MSA can be reinstalled in their respective locations on the new backplane. The parts that will be removed from the old chassis and then reinstalled in the new chassis include: • Controllers or blank • Hard drives or blanks • Power button module • Fibre Channel I/O modules or interconnect blank • Fan modules • SCSI I/O modules or blanks • Power supply modules When finished, write the serial number of the original chassis on the label of the replacement chassis. 92 Customer replaceable components