HP StorageWorks 2/128 HP StorageWorks SAN Director 2/128 Fabric OS V4.2.x Rele - Page 4

Documentation Improvements The following improvements have been made to the Fabric OS software since the last HP 4.x release: ■ Secure Telnet may now be connected with two LAN cards. ■ Improvements have been made to the reboot code. ■ Problems that caused compaqt flash full have been resolved. ■ We have increased the number of HBAs that can be displayed by Web Tools. ■ We have improved the reliability of firmware download on an active fabric. ■ A firmwaredownload is now successful to a single CP SAN Director 2/128 chassis through Fabric Manager and Web Tools. ■ Web Tools events now use adjusted timezone time, rather than coordinated universal time (UTC). Supported Switches Fabric OS v4.2.x supports the HP StorageWorks SAN Switch 2/8V, 2/16N, 2/16V, 2/32, Core Switch 2/64, and SAN Director 2/128. Technical Support Contact Hewlett-Packard support for hardware, firmware, and software support, including product repairs and part ordering. To assist your support representative and to expedite your call, have the following information available when you call. ■ Technical support contact number, if available ■ Switch model ■ Switch operating system version ■ Error messages received ■ Output from supportshow command ■ Detailed problem description and specific questions ■ Description of any troubleshooting steps already performed and results Documentation This section discusses documentation associated with the Fabric OS 4.2.x. 4 SAN Director 2/128 Fabric OS 4.2.x Release Notes